Used Gradall Aerial Lifts Berkeley

Classifications of Scissor Lifts & Aerial Lift Platforms
Scissor lifts are made of a series of crisscrossed steel arms, linked up to create an X pattern. When the crisscrossed arms are extended, the platform is vertically raised. There are support railings along the edges of the lifting mechanism to be able to help secure the workers' tools and keep them safe.

Scissor lifts provide a low profile which is ideal for hard dirt surfaces, concrete and pavement. These machinery use either a combustion engine or electric motor to be able to move the lift and power the lifting mechanism. The operator would have to move the lift itself if she or he needs to travel horizontally, since the lift apparatus only operates the lift vertically.

Rough Terrain Scissor Lift
Rough terrain scissor lifts utilize the identical lifting technology as a typical scissor lift. The key difference is that the rough terrain units feature a different base which is specifically made for uneven surfaces. These units also provide oversized all terrain tires and higher ground clearance. The rough terrain scissor lifts use 4-wheel drive so as to navigate through difficult and muddy terrain without problems.

Telescopic Boom Lift
Telescopic booms are designed to be elevated both diagonally and vertically. This particular unit has a small work platform that houses controls to be able to operate the boom. The controls function with a combustion engine so as to power the hydraulics which power the boom and move the lift. The telescopic boom lift is an independent lift unit and has off-road capable tires.

Articulating Boom Lift
There are two telescopic booms on the articulating boom lift. These are connected with a moving elbow mechanism. This lifting machinery has a bucket or a small work platform that is outfitted with hand controls in order to control the boom. These are stand-alone lifts which are powered by a combustion engine. Articulating boom lifts are available with either off-road or hard surface tires. These lifts are designed in order to reach over top of and on top of buildings.

Aerial Mast Lift
The aerial mast lift uses a telescopic mast so as to lift a work platform vertically into the air. Normally, these lifts are pneumatic powered or electrically powered and are self-propelled machines. These equipment offer a great solution for working in high racks within narrow warehouse aisles. It is really essential to note that aerial mast lifts are limited to vertical movement and are not recommended for off-road use.

• Used Nissan Outdoor Forklifts Berkeley
  For businesses that raise and transport heavy supplies and merchandise on a regular basis, there is probably no more effective or valuable machine as the forklift. Lift trucks are a popular site in lumber yards,... More
• Used Yale Gas Forklifts Berkeley
  Narrow Aisle and very Narrow Aisle Trucks: Some forklifts have VNA features or NA features. To be able to operate safely and efficiently, the majority of counterbalanced trucks need at least 11 feet of aisle... More
• Used Taylor High Capacity Forklifts Berkeley
  The T-Series forklifts by Taylor Machine Work's can all meet the day-to-day challenges of material handling tasks. The matched power trains, rigid chassis, operator safety and convenience, highest quality parts along with the high visibility... More
• Used CAT 4 Wheel Drive Forklifts Berkeley
  Mainly rough terrain vehicles are used to handle stacks of wood, pallets of concrete blocks and other handling jobs on rough surfaces and the surfaces are not paved. These equipment are engineered to work in... More
• Used Taylor Container Forklift Berkeley
  Ever since 1976, Taylor Machine Works has built, designed and marketed empty container handlers. The "Big Red" line of empty handlers reflects the knowledge and experience gained during those years. The Taylor empty handlers are... More